Precedence: list
Message-ID: <list-1160897@2rosenthals.com>
Reply-To: "OS/2 Wireless Users Mailing List"
 <os2-wireless_users@2rosenthals.com>
Sender: "OS/2 Wireless Users Mailing List"
 <os2-wireless_users@2rosenthals.com>
To: "OS/2 Wireless Users Mailing List"
 <os2-wireless_users@2rosenthals.com>
Date: Mon, 7 May 2007 00:45:04 +0100
From: "John Poltorak" <os2-wireless_users@2rosenthals.com>
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Subject: Re: [OS2Wireless] Help with Samba

On Mon, May 07, 2007 at 06:55:18AM +1000, Ed Durrant wrote:
> Chris Hellwig wrote:
> > John Poltorak schrieb:
> >> I know this is slightly off topic but hopefully someone here can help...
> >>
> >> I'm hoping to migrate from Warp Server to Samba and am trying to set 
> >> up a samba server, but can't get a Windows system connect. Does 
> >> anyone know what I should be looking at to see why it isn't connecting?
> >>
> >> Both system are on an internal (192.168) network and can ping each 
> >> other, but I don't know how to tell if I have set up the Windows 
> >> system properly.
> >> It doesn't connect so there is obviously a misconfiguration.
> >>
> >>   
> > First of all it is necessary to show your smb.conf.... This is a good 
> > starting point to discuss.
> >
> > Regards
> >  Chris
> >
>  Also does the Windows box connect to warp server OK, only not to Samba ?

I only have TCP/IP running on the Windows box - never tried to connect it 
to Warp Server, but WS is not running on the Samba box  currently.

 
>  Have you stopped warp server before starting  SAMBA Server - you don't 
> have both running at the same time do you ?

No.
 
>  If the windows box is a Vista box - good luck - there are a lot of new 
> problems with that.

Windows ME.

 
> If trying to use NetBeui on windows XP, you do know you have to 
> specially install the protocol on XP from the install CD.
> 
> Also worth trying is (diosconnect you local network from the internet 
> while doing this) - disable any software firewall on the windows box and 
> see if you can connect then. If you  can you need to reconfigure your 
> software firewall to allow this traffic through.
> 
> Cheers/2
> 
> Ed.


-- 
John



=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
This message is sent to you because you are subscribed to
  the mailing list <os2-wireless_users@2rosenthals.com>.
To unsubscribe, E-mail to: <os2-wireless_users-off@2rosenthals.com>
To switch to the DIGEST mode, E-mail to <os2-wireless_users-digest@2rosenthals.com>
To switch to the INDEX mode, E-mail to <os2-wireless_users-index@2rosenthals.com>
Send administrative queries to  <os2-wireless_users-request@2rosenthals.com>
To subscribe (new addresses), E-mail to: <os2-wireless_users-on@2rosenthals.com> and reply to the confirmation email.
Web archives are publicly available at: http://lists.2rosenthals.com

This list is hosted by Rosenthal & Rosenthal, LLC
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)

=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=