On Sun, 31 Aug 2003 18:51:46 -0400, Ray Hyder wrote:
Hi Ray!
>Jen, thanks for the updated driver! But it didn't help... :-(
Ok, then you are a beta tester ;)
>I can transfer a 10 meg file from system 2 to system 1 and sometimes it
>works and sometimes it doesn't. When it does work I get about a 300
>KBPS rate. When it doesn't work all activity halts and nothing will
>bring back the link except a shut down and reboot. If I have wifistat
>running at the time or if I start wifistat after I lose the link then
>the whole system freezes and only the reset button or the BRS will
>work. An interesting side effect is that I actually have to reboot
Are both machines running OS/2?
>twice after a wifistat boot because a get a trap D in sysio2k during
>the first reboot. Yes, I have triple checked for irq conflicts. Both
??? Never heard of that. It sounds strange, though - like some hardware not being reinitialized at boot. Has
somebody else seen this behaviour?
>the hardware manager and sysinfo report that the MA311 is all alone on
>irq 10.
What does the BIOS say? Or PCI? Not every driver (or every hardware, for that matter) reports to Ressource
Manager.
>The MA311 appears to have the weaker transmitter but why would it not
>recover, if it lost the link, and at least abort the transfer with an
>error instead of just hanging? The sio2k trap D on reboot is a clue I
>think. Any ideas? - ray
Can you send me a LANTRAN.LOG after the link got lost? The driver can create debug messages if you
have the IBMPRISM.MSG file in \IBMCOM and if you set DEBUG_LEVEL=0xFFDF in PROTOCOL.INI.
with best regards
Jens.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).
For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).
back to list