| From: |
Kris Steenhaut <os2-wireless_users@2rosenthals.com> |
|
| Sender: |
os2-wireless_users-owner <os2-wireless_users-owner@2rosenthals.com> |
| Subject: |
[OS2Wireless] wlanstat question |
| Date: |
Thu, 06 Jan 2005 22:45:51 +0100 |
| To: |
os2-wireless_users@2rosenthals.com |
|
|---|
John Poltorak schreef:
On Thu, Jan 06, 2005 at 11:57:00AM +0100, Kris Steenhaut wrote:
John Poltorak schreef:
On Thu, Jan 06, 2005 at 10:12:26AM +0100, Kris Steenhaut wrote:
- dhcp doesn't work
- when in xwlan set to "manually" and ip address 192.168.2.102, then connection is established and working for 100 %.
Can you post your setup.cmd
If you mean when trying to connect by means of dhcpthen it is:
route -fh
arp -f
ifconfig lo 127.0.0.1
: ifconfig lan1 192.168.100.1 netmask 255.255.255.0 broadcast 192.168.100.255 metric 1 mtu 1500
REM ifconfig lan2 metric 1 mtu 1500
.....
REM ifconfig lan7 metric 1 mtu 1500
dhcpstrt -i lan1
^^^^^^^^^^^^^^^^^^^^ <==========================================
and the relevant part (last 20 lines) of your dhcpcd.cfg?
# Basic options required
clientid MAC
interface lan0
^^^^^^^^^^^^^^^^^^^^ <==========================================
I'm no expert on dhcp but shouldn't these two interfaces be the same?!
My first remark would be simple human beings better don't fiddle around with that file.
To the matter: when all is set to lan0, that doesn't make a difference.
--
Groeten uit Gent,
Kris
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
To unsubscribe from this list, send a message to
steward@2rosenthals.com with the command
"unsubscribe os2-wireless_users" in the body
(omit the quotes).
For help with other commands, send a message
to steward@2rosenthals.com with the command
"help" in the body (omit the quotes).
This list is hosted by Rosenthal & Rosenthal
P.O. Box 281, Deer Park, NY 11729-0281. Non-
electronic communications related to content
contained in these messages should be directed
to the above address. (CAN-SPAM Act of 2003)
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
|